Enums¶
Enums used in NI-DMM
ADCCalibration¶
AcquisitionStatus¶
ApertureTimeUnits¶
AutoZero¶
-
class
nidmm.
AutoZero
[source]¶ -
AUTO
¶ The drivers chooses the AutoZero setting based on the configured method and resolution.
-
OFF
¶ Disables AutoZero.
-
ON
¶ The DMM internally disconnects the input signal following each measurement and takes a zero reading. It then subtracts the zero reading from the preceding reading.
-
ONCE
¶ The DMM internally disconnects the input signal for the first measurement and takes a zero reading. It then subtracts the zero reading from the first reading and the following readings.
-
CableCompensationType¶
DCNoiseRejection¶
-
class
nidmm.
DCNoiseRejection
[source]¶ -
AUTO
¶ The driver chooses the DC noise rejection setting based on the configured method and resolution.
-
NORMAL
¶ NI-DMM weighs all samples equally.
-
SECOND_ORDER
¶ NI-DMM weighs the samples taken in the middle of the aperture time more than samples taken at the beginning and the end of the measurement using a triangular weighing method.
-
HIGH_ORDER
¶ NI-DMM weighs the samples taken in the middle of the aperture time more than samples taken at the beginning and the end of the measurement using a bell-curve weighing method.
-
Function¶
-
class
nidmm.
Function
[source]¶ -
DC_VOLTS
¶ DC Voltage
-
AC_VOLTS
¶ AC Voltage
-
DC_CURRENT
¶ DC Current
-
AC_CURRENT
¶ AC Current
-
TWO_WIRE_RES
¶ 2-Wire Resistance
-
FOUR_WIRE_RES
¶ 4-Wire Resistance
-
FREQ
¶ Frequency
-
PERIOD
¶ Period
-
TEMPERATURE
¶ NI 4065, NI 4070/4071/4072, and NI 4080/4081/4182 supported.
-
AC_VOLTS_DC_COUPLED
¶ AC Voltage with DC Coupling
-
DIODE
¶ Diode
-
WAVEFORM_VOLTAGE
¶ Waveform voltage
-
WAVEFORM_CURRENT
¶ Waveform current
-
CAPACITANCE
¶ Capacitance
-
INDUCTANCE
¶ Inductance
-
LCCalculationModel¶
MeasurementCompleteDest¶
-
class
nidmm.
MeasurementCompleteDest
[source]¶ -
NONE
¶ No Trigger
-
EXTERNAL
¶ AUX I/O Connector
-
PXI_TRIG0
¶ PXI Trigger Line 0
-
PXI_TRIG1
¶ PXI Trigger Line 1
-
PXI_TRIG2
¶ PXI Trigger Line 2
-
PXI_TRIG3
¶ PXI Trigger Line 3
-
PXI_TRIG4
¶ PXI Trigger Line 4
-
PXI_TRIG5
¶ PXI Trigger Line 5
-
PXI_TRIG6
¶ PXI Trigger Line 6
-
PXI_TRIG7
¶ PXI Trigger Line 7
-
LBR_TRIG0
¶ Internal Trigger Line of a PXI/SCXI Combination Chassis
-
OperationMode¶
RTDType¶
-
class
nidmm.
RTDType
[source]¶ -
CUSTOM
¶ Performs Callendar-Van Dusen RTD scaling with the user-specified A, B, and C coefficients.
-
PT3750
¶ Performs scaling for a Pt 3750 RTD.
-
PT3851
¶ Performs scaling for a Pt 3851 RTD.
-
PT3911
¶ Performs scaling for a Pt 3911 RTD.
-
PT3916
¶ Performs scaling for a Pt 3916 RTD.
-
PT3920
¶ Performs scaling for a Pt 3920 RTD.
-
PT3928
¶ Performs scaling for a Pt 3928 RTD.
-
SampleTrigger¶
-
class
nidmm.
SampleTrigger
[source]¶ -
IMMEDIATE
¶ No Trigger
-
EXTERNAL
¶ AUX I/O Connector Trigger Line 0
-
SOFTWARE_TRIG
¶ Software Trigger
-
INTERVAL
¶ Interval Trigger
-
PXI_TRIG0
¶ PXI Trigger Line 0
-
PXI_TRIG1
¶ PXI Trigger Line 1
-
PXI_TRIG2
¶ PXI Trigger Line 2
-
PXI_TRIG3
¶ PXI Trigger Line 3
-
PXI_TRIG4
¶ PXI Trigger Line 4
-
PXI_TRIG5
¶ PXI Trigger Line 5
-
PXI_TRIG6
¶ PXI Trigger Line 6
-
PXI_TRIG7
¶ PXI Trigger Line 7
-
PXI_STAR
¶ PXI Star Trigger Line
-
AUX_TRIG1
¶ AUX I/0 Connector Trigger Line 1
-
LBR_TRIG1
¶ Internal Trigger Line of a PXI/SCXI Combination Chassis
-
ThermistorType¶
ThermocoupleReferenceJunctionType¶
ThermocoupleType¶
TransducerType¶
TriggerSource¶
-
class
nidmm.
TriggerSource
[source]¶ -
IMMEDIATE
¶ No Trigger
-
EXTERNAL
¶ AUX I/O Connector Trigger Line 0
-
SOFTWARE_TRIG
¶ Software Trigger
-
PXI_TRIG0
¶ PXI Trigger Line 0
-
PXI_TRIG1
¶ PXI Trigger Line 1
-
PXI_TRIG2
¶ PXI Trigger Line 2
-
PXI_TRIG3
¶ PXI Trigger Line 3
-
PXI_TRIG4
¶ PXI Trigger Line 4
-
PXI_TRIG5
¶ PXI Trigger Line 5
-
PXI_TRIG6
¶ PXI Trigger Line 6
-
PXI_TRIG7
¶ PXI Trigger Line 7
-
PXI_STAR
¶ PXI Star Trigger Line
-
AUX_TRIG1
¶ AUX I/O Connector Trigger Line 1
-
LBR_TRIG1
¶ Internal Trigger Line of a PXI/SCXI Combination Chassis
-